HÜBNER launches the SensIQ product family for door sealing systems
"SensIQ contact is a central component of the new product family," explains Christoph Heuser, Head of the HÜBNER Business Unit Material Solutions Rail & Bus. The safety edge can be integrated into finger protection profiles in vehicle doors. When a person or object comes in contact with the safety contact strip, a switching pulse is generated that causes the door to remain open. The protective profile also provides anti-trap detection even when doors have closed. If a person or object has become caught, the door opens again automatically. "This gives optimum protection for people in the boarding area of buses and trains," says Heuser.
Another advantage of SensIQ contact is its easy installation. Flush end moldings in the profiles allow for quick installation and a tighter, more sensitive design for the switching chambers, which makes the product as a whole especially responsive.
SensIQ contact is made using EPDM rubber. "This gives it a high level of environmental resistance and there is an optimal balance between the EPDM and silicone rubber in the profiles," points out Martin Breuniger, HÜBNER Business Development Rail & Bus. “At the same time, the product also fulfills the strict fire safety standards EN 45545-2, HL2/HL3 for rail applications as well as the UN-ECE R118 standard for street use.“
Additional SensIQ contact benefits
- At high switching angles, switching forces and paths are nevertheless reduced.
- Rated at more than 1 million switching cycles, the system has great durability, a key characteristic which is confirmed by ongoing climatic chamber and switching cycle testing.
- SensIQ contact is available in a wide variety of sensor and cable lengths with drag line-compatible cables and pre-assembled plugs.
- The sensors are entirely halogen-free.
+49 561 998-1710
Zurück zur Übersicht
Gummi-Welz GmbH & Co. KG
Tel: +49 731 93609-0
Fax: +49 731 93 609-90